Vivax 32LE95T2S2SM User Manual

VIVAX ENG
18
► LAN INPUT
Connect the RJ45 LAN (Local Area network) cable for connecting to external
modem or network access equipment.
Your TV will require an internet connection to operate all functions. Data
usage charges may apply.
To access the internet, you must subscribe high speed
broadband internet service from your internet service provider.
Your TV can be connected to your home network in two ways:
- Wired: Using the RJ45 (LAN) connector on the back panel.
- Wireless: Using the internal wireless or external wireless USB adapter
and your home wireless network.
Note: The following instructions are just the usual ways to connect your TV to the wired or
wireless network. The connection method may be different depending on your actual
network configuration. If you have any questions about your home network, please refere
to your ISP (Internet Service Provider)
Connecting to a wired network:
1. Ensure you have:
- An ethernet cable long
enough to reach your
TV
- A router or modem
with an available
Ethernet port
- A high-speed inte-rnet
connection
- An Ethernet (LAN) port
on the back of the TV
2. Connect your ethernet
cable to the router and
to the Ethernet port on
the back of the TV.
3. Use the Network
Settings to confi-gure
the TV.
Connecting to a
wireless network:
To connect to a wireless
network
1. Ensure you have:
- A router broadcasting a high-speed wireless signal
- A high-speed internet connection
2. Use the Network Settings to configure the TV.
Router
RJ45
Ethernet
Porton
theback
panel
Modem
TVSet
Internet
Modem
TVSet
WirelessRouter

Vivax 32LE95T2S2SM Specifications

General

Brand	Vivax
Model	32LE95T2S2SM
Category	LED TV
Language	English