VIVAX ENG
28
Than, you can press navigation buttons ▼ / ▲ / ◄ / ► to choose one of the
following working modes (inputs): TV, AV, AV, HDMI1, HDMI2 and than press
OK button to confirm selection.
If you want to watch (or search) TV channels, please press navigation buttons ▼
/ ▲ / ◄ / ► to select TV item and press OK.
For Auto scaninng, please folow below instructions:
Automatic TV Channels installation
TV receiver can automatically search all channels and find all programs.
In case you have not
previously scan channels
(there are no channels saved
in the TV memory), the
message "No programs" will
be displayed on the screen.
You should perform Auto Channel scan function for fast and easy Channels
scan&save.
LCN: You can adjust whether
you want to see the programs
on the list in the order
specified by the service
provider ("On") or arranged in
the order that they were
found (LCN option "Off").
Search Type: You can select
search ATV (Analogue
programs) and ATV+DTV
(Analogue and Digital
programs).
During search for ATV (Analogue TV programs) you can press MENU button and
left arrow to skip ATV setup (if your region does not have the ATV program).
Digital Type: you can choose whether you search for DVB-T or DVB-C (cable
programs).
To Start Scan, press button ▼ to select „Start Scan“ item and press OK.
Now, TV set will automatically search all frequencies and found channels will be
stored in memory.
To Next Page
Loading...
Need help?
General
