Vivax DVB-T2 154 - Aspect Ratio; Resolution; TV Format; Video Output

20
Aspect Ratio
Change the aspect ratio of Video. [Auto], [16:9 PillarBox], [16:9
Pan&Scan], [4:3 LetterBox], [4:3 Pan&Scan], [4:3 Full], [16:9
WideScreen]
Resolution
You can change this setting if the picture resolution does not
appear to be correct. This setting is to match the most common
setting for HDMI.
[480P]: for NTSC TV system.
[480i]: for NTSC TV system
[576P]: for PAL TV system.
[576i]: for PAL TV system.
[720P]: for NTSC or PAL TV system.
[1080i]: for NTSC or PAL TV system.
[1080P(50HZ)]: for NTSC or PAL TV system.
[1080P(60HZ)]: for NTSC system.
TV Format
If the picture does not appear to be correct you can change this
setting. This should match the most common setting for TVs in
your country.
[NTSC]: for NTSC system TV.
[PAL]: for PAL system TV.
Video Output
Change the video output. [CVBS], [RGB]
3D Output (option)
Change 3D Output Setting.
[OFF] : Set 3D Output Off
[Side by Side]: Set 3D Output format SBS [Auto] Set 3D
Output
Auto [Top/Bottom]: Set 3D Output format T/B
OSD Transparency
Change OSD Transparency. [0%], [20%], [40%], [60%], [80%].