17
2.Remote control——RF remote control / IR remote control
(1) Wireless RF remote control: when the screen is hidden and installed in the slot or requires remote control, wireless remote
control can be used. It can control the screen without aiming at the IR receiver.
(2) IR remote control needs to be connected with the IR receiver. When using IR remote control, make sure that the power switch
is turned on and aligned with the IR receiver head, so that the IR remote control can operate normally.(Unlike the wireless
remote control, the back of the infrared remote control is black, and there is an infrared signal lamp on the top)
IR receiver
Up
Stop
Down
When using, please aim
at the IR receiver
Front of remote control Perspective view of infrared
remote control
The remote have
infrared transmitter in here
To Next Page
Loading...