Vivitek D851 - Installation Menu - Advanced Features; OSD, Peripheral, and 3 D Settings Configuration

DLP Projector—User’s Manual
Advanced Feature
Press the Menu button to open the OSD menu. Press ﾕﾓ to move to the Installation II menu.
Press ルヴ to move to the Advanced menu and then press Enter or ﾓ. Press ルヴ to move up and
down in the Advanced menu. Press ﾕﾓ to change values for setting.
ITEM DESCRIPTION
Press Enter / ﾓ to enter the OSD setting menu. See page
33 for more information on OSD
Menu Setting
OSD Menu Setting
.
Press Enter/ ﾓ to enter the Peripheral Test menu. See page
33 for more information on
Peripheral Test
Peripheral Test.
After replacing the lamp, this item should be reset. See page 34 for more information on Lamp
Hour Reset
Lamp Hour Reset
.
Low Power Mode Press ﾕﾓ to turn Low Power Mode on or off.
– 32 –
3D Press Enter/ ﾓ to enter the 3D menu. See page 34 for more information on 3D setting..
Press ﾕﾓ to select RS232 (remote) or Network (LAN) mode depending on projector connec-
tion method.
RS232
Press (Enter) / ﾓ to enter the Network menu. See page 35 for more information on
Network
Network.
Note:
To enjoy the 3D function, first enable the Play Movie in 3D setting found in your DVD
device under the 3D Disc Menu.