To Next PageTo Next PageHow to adjust color on Vivitek Projector?
If the color of the projected image from your Vivitek Projector does not match the source image, adjust the Color Temperature and Gamma settings on the Image menu of the OSD.
Why does the lamp go off on my Vivitek D8 Projector?
If the lamp of your Vivitek Projector goes off, it might be due to power surges. Try re-plugging the power cord. When the Ready LED is on, press the power button. You may also need to replace the lamp module or put the old lamp back in the projector and have the projector serviced.
How to fix a Vivitek Projector when no image appears on the screen?
If no image appears on the screen when using your Vivitek Projector, verify the settings on your notebook or desktop PC. If that doesn't work, turn off all equipment and power up again in the correct order.
How to correct a trapezoid image on a Vivitek Projector?
To correct a trapezoid image (wider at the top or bottom) on your Vivitek Projector, position the projector so it is as perpendicular to the screen as possible. You can also use the Keystone button on the remote control or projector to correct the problem.
How to flip the image on a Vivitek Projector?
To flip the image on your Vivitek Projector, check the Projection setting on the Installation I menu of the OSD.
How to fix no image on Vivitek Projector?
If no image appears on the screen of your Vivitek Projector, verify the settings on your notebook or desktop PC. Also, try turning off all equipment and powering up again in the correct order.
How to fix a blurred image on a Vivitek D8 Projector?
If the image on your Vivitek Projector is blurred, adjust the focus on the projector. You can also press the Auto button on the remote control or projector. Ensure the projector-to-screen distance is within the specified 10-meter (33-feet) range and check that the projector lens is clean.
How to adjust contrast on Vivitek D8?
If the image from your Vivitek Projector is flat with no contrast, adjust the Contrast setting on the Image menu of the OSD.
How to fix a streaked image on Vivitek Projector?
If the image from your Vivitek Projector is streaked, set the Frequency and Tracking settings on the Computer menu of the OSD to the default settings. To ensure the problem is not caused by a connected PC’s video card, connect to another computer.
How to correct trapezoid image effect on Vivitek D8 Projector?
If the image from your Vivitek Projector is wider at the top or bottom (trapezoid effect), position the projector so it is as perpendicular to the screen as possible. You can also use the Keystone button on the remote control or projector to correct the problem.
General| Projection Technology | DLP |
|---|---|
| Lamp Life | 10, 000 hours (depending on mode) |
| Inputs | HDMI, VGA, Composite Video, Audio In |
| Output Connectors | Audio Out, VGA Out |
| Power Consumption | <0.5W (Standby) |
