2
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
3mm Allen
Wrench
A (x1)
Clamp
B (x1)
Adapter
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please contact our product support team at 309-278-5303 or help@vivo-us.com for
further assistance. Check carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for any purpose that is not
explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS.
ADULT SUPERVISION IS REQUIRED.
ASSEMBLY STEPS
STEP 1
Set Clamp (A) aside until the next step. Test fit one M6x12 mm Screw (S-A) with your pole.
If the screw fits: Remove the screw and move on to the next step.
If the screw is too large: Attach Adapter (B) to the pole using the screws and a 3mm Allen
Wrench that came with the stand.
S-A (x3)
M6x12mm Screw
B
From original
stand
3mm Allen
Wrench
To Next Page
