To Next PageTo Next Page
Need help?Do you have a question about the Vivo STAND-V002FG and is the answer not in the manual?
General| Model | STAND-V002FG |
|---|---|
| Category | Racks & Stands |
| Type | Monitor Stand |
| VESA Compatibility | 75x75mm and 100x100mm |
| Color | Black |
| Height Adjustment | Yes |
| Rotation | 360° |
| Screen Size | 13" to 32" |
| Material | Steel |
| Weight Capacity | 17.6 lbs |
| Compatibility | Most flat and curved screen monitors |
Adhere to instructions, use qualified technicians, check parts, and respect weight limits.
Avoid crushing injuries; prevent children from climbing; use wall anchors.
Contains small parts unsuitable for children under 3; requires adult supervision.
Detailed list of all included components for stand assembly.
Identifies necessary tools for proper installation of the desk stand.
Apply Grommet Soft Pad (H) to Grommet Plate (C).
Assemble Grommet Plate (C) to Pole (A) using M5x14mm Screws (S-A).
Apply Washer Soft Pads (S-D) to M6 Washers (S-C).
Secure Grommet Plate (C) to Glass Base (B) and slide Pole Cover (E) over Pole (A).
Attach Rubber Feet (G) to the bottom of the Glass Base (B).
Slide Pole Cable Clip (I) and Arm (D) onto Pole (A) and secure arm.
Assemble VESA Plates (F) to monitors using screws and spacers.
Slide VESA Plates (F) onto Arm (D) and install Security Nuts (S-E).
Use cable clips (J, I) to organize and route cables along the stand.
Use 5mm Allen Wrench (T-C) to adjust monitor tilt.
Avoid extending arms too far to prevent tipping.
Provides contact details, operating hours, and website for customer assistance.
