VivoLink VLHUB121-MME - Display Control; Switcher Baud Rate Setting

18G 2x1 Presentation Switcher with Soft Codec and CEC
14
6.2.4 Display Control
Command
Function
Feedback Example
#SET_AUDIO_MUTE
Mute/unmute the display audio through
CEC and RS232 channels.
@AUDIO_MUTE_UNMUTE
#SET_VOL +
Increase the display audio through CEC
and RS232 channels.
@VOL -
#SET_VOL -
Decrease the display audio through CEC
and RS232 channels.
@VOL +
#SET_DISPLAY 1
Power on the display.
@DISPLAY 0
#SET_DISPLAY 0
Power off the display.
@DISPLAY 1
6.2.5 Switcher Baud Rate Setting
Command
Function
Feedback Example
#SET_RS232_BAUD 0
Set the RS232 baud rate to 115200.
@RS232_BAUD 0
#SET_RS232_BAUD 1
Set the RS232 baud rate to 57600.
@RS232_BAUD 1
#SET_RS232_BAUD 2
Set the RS232 baud rate to 38400.
@RS232_BAUD 2
#SET_RS232_BAUD 3
Set the RS232 baud rate to 19200.
@RS232_BAUD 3
#SET_RS232_BAUD 4
Set the RS232 baud rate to 9600.
@RS232_BAUD 4
#SET_RS232_BAUD 5
Set the RS232 baud rate to 4800.
@RS232_BAUD 5
#SET_RS232_BAUD 6
Set the RS232 baud rate to 2400.
@RS232_BAUD 6
#GET_RS232_BAUD
Get the RS232 baud rate.
@RS232_BAUD 0
@RS232_BAUD 1
@RS232_BAUD 2
@RS232_BAUD 3
@RS232_BAUD 4
@RS232_BAUD 5
@RS232_BAUD 6