Vivotek FD8163 - Page 151

VIVOTEK
User's Manual - 151
percentage when sharpness=100
gammacurve 0~100 0 4/4 Gamma curve.
lowlightmode <boolean> 1 4/4 Enable/disable low light mode.
profile_i0_enable <boolean> 0 4/4 Enable/disable this profile setting
profile_i0_policy day,
night,
schedule
night 4/4 The mode which the profile is
applied to.
profile_i0_begintime hh:mm 18:00 4/4 Begin time of schedule mode.
profile_i0_endtime hh:mm 06:00 4/4 End time of schedule mode.
profile_i0_contrast -5 ~ 5 0 4/4 Adjust contrast of image
according to mode settings.
profile_i0_sharpness -3~3 0 4/4 Adjust sharpness of image
according to mode settings.
profile_i0_sharpnesspercent 0~100 50 4/4 Adjust sharpness value of
percentage when sharpness=100
profile_i0_gammacurve 0~100 0 4/4 Gamma curve
profile_i0_lowlightmode <boolean> 1 4/4 Enable/disable low light mode.
profile_i0_wdrcstrength 0~2 1 4/4 WDR enhanced
0: low
1: medium
2: high
profile_i0_wdrcmode 0~3 0 4/4 WDR enhanced
0: off
1: auto
2: always on
3:keep current value
7.12 Image setting for preview
Group: imagepreview_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightness -5~5 -5 4/4 Adjust brightness of image
according to mode settings.
saturation -5~5,100 0 4/4 Adjust saturation of image
according to mode settings.
100 for saturation
percentage mode.
saturationpercent 0~100 50 4/4 Adjust saturation value of