VIVOTEK
User's Manual - 65
URL command -- http://<ip address>:<http port>/<access name for stream 1 ~ 5>
For example, when the Access name for stream 2 is set to video2.mjpg:
1. Launch Mozilla Firefox or Netscape.
2. Type the above URL command in the address bar. Press Enter.
3. The JPEG images will be displayed in your web browser.
NOTE
► Microsoft
®
Internet Explorer does not support server push technology; therefore, You will not be able
to use the server push method to access an MJPEG stream as described above.
► Users can only use URL commands to request the stream 5. For more information about URL
commands, please refer to page 119.
RTSP Streaming
To utilize RTSP streaming authentication, make sure that you have set a password for the Network
Camera rst; please refer to Security > User account on page 74 for details.
http://192.168.5.151/video2.mjpg
NOTE:
To Next Page
Loading...
