Vivotek FD8163 - Page 80

VIVOTEK
80 - User's Manual
You can click Restore to recall the original settings without incorporating the changes. When completed
with the settings on this page, click Save to enable the settings.
If you want to congure another sensor setting for day/night/schedule mode, please click Prole to open
the Prole of exposure settings page as shown below.
Activated period:
Select the mode this profile to apply to: Day mode, Night mode, or Schedule mode.
Please manually enter a range of time if you choose Schedule mode. Then check Save to take effect.
Please follow the steps below to setup a prole:
1. Check Enable this prole.
2. Select the applied mode: Day mode, Night mode,
or Schedule mode. Please manually enter a range
of time if you choose Schedule mode.
3. Congure Exposure control settings in the folowing
columns. Please refer to previous dicussions for
detailed information.
4. Click Save to enable the setting and click Close to
exit the page.
Auto: If you set Exposure mode as Auto, the Exposure time and Gain control will not be congurable
since the sensor library will automatically adjust the value according to the ambient light. Then you can
congure iris mode as “indoor” or “outdoor” to reach the best image quality.