VIVOTEK
User's Manual - 11
5. Connect an Ehternet cable to the RJ45.port. This camera is powered by a PoE device.
Install the IW2 utility and use it to locate the camera and start a web console.
6. With a live view on screen, use a Phillips screwdriver to loosen the retention screws
on the camera bracket and adjust the camera's shooting angle and direction. Turn the
camera lens towards the eld of view of your interest.
0002D1730202
00-02-D1-73-02-02 192.168.5.151 FD8168
IW2
Browser
LAN
1
2
3
350°
350°
60°
To Next Page
Loading...
Need help?
General
