Vivotek FD8179-H User Manual

VIVOTEK
User's Manual - 91
Security > HTTPS
(Hypertext Transfer Protocol over TLS)

This section explains how to enable authentication and encrypted communication over TLS
(Transport Layer Security). It helps protect streaming data transmission over the Internet
on higher security level.
Create and Install Certicate Method
Before using HTTPS for communication with the Network Camera, a Certicate must be created
rst. There are three ways to create and install a certicate:
Create self-signed certificate
1. Select this option from a pull-down menu.
2. In the rst column, select Enable HTTPS secure connection, then select a connection option:
“HTTP & HTTPS” or “HTTPS only”.
3. Click Create certicate to generate a certicate.
4. The Certicate Information will automatically be displayed as shown below. You can click Certi-
cate properties to view detailed information about the certicate.

Vivotek FD8179-H Specifications

General

Brand	Vivotek
Model	FD8179-H
Category	Security Camera
Language	English