Vivotek FE8171V - Page 165

VIVOTEK
User's Manual - 165
Both server, Rx = receiver box,
Both = DVR.
network_wire <boolean> 1 0/7 Indicate whether to support
Ethernet.
network_wireless <boolean> 0 0/7 Indicate whether to support
wireless.
wireless_s802dot11b <boolean> 0 0/7 Indicate whether to support
wireless 802.11b+.
wireless_s802dot11g <boolean> 0 0/7 Indicate whether to support
wireless 802.11g.
wireless_encrypt_wep <boolean> 0 0/7 Indicate whether to support
wireless WEP.
wireless_encrypt_wpa <boolean> 0 0/7 Indicate whether to support
wireless WPA.
wireless_encrypt_wpa2 <boolean> 0 0/7 Indicate whether to support
wireless WPA2.
wireless_beginchannel 1 ~ 14 255 0/7 Indicate the begin channel
of wireless network
wireless_endchannel 1 ~ 14 255 0/7 Indicate the end channel of
wireless network
derivative_brand <boolean> 1 0/7 Indicate whether to support
the upgrade function for the
derivative brand. For
example, if the value is
true, the VVTK product can
be upgraded to VVXX.
(TCVV<->TCXX is
excepted)
npreset 0, <positive
integer>
20 0/7 Number of preset locations
eptz 0, <positive
integer>
7 0/7 A 32-bit integer, each bit
can be set separately as
follows:
Bit 0 => stream 1 supports
ePTZ or not.
Bit 1 => stream 2 supports
ePTZ or not.
The rest may be deduced by
analogy