Vivotek FE8171V - Page 50

VIVOTEK
50 - User's Manual
3. The following information will show up in a pop-up window after clicking Create. Then click Save to
generate the certicate.
4. The Certicate Information will automatically be displayed in the third column as shown below. You
can click Property to see detailed information about the certicate.
5. Check Enable HTTPS secure connection, then select a connection option: “HTTP & HTTPS” or
“HTTPS only”. Click Save to enable the settings.
Create certificate and install : Select this option if you want to create a certicate from a certicate
authority.
1. Select the third option.
2. Click Create to open the Create Certicate page, then click Save to generate the certicate.