Vivotek FE8172V User Manual

VIVOTEK
User's Manual - 45
Access log
Access log displays the access time and IP address of all viewers (including operators and
administrators) in a chronological order. The access log is stored in the Network Camera’s buffer and
older events will be overwritten when the number of events reaches a limit.
System > Parameters
Advanced Mode
The View Parameters page lists the entire system’s parameters in an alphabetical order. If you
need technical assistance, use a text-editor program to copy and save the parameters listed on
this page. Send the parameter text le to VIVOTEK’s technical support.

Vivotek FE8172V Specifications

General

Maximum Resolution	1920x1080
Lens Type	Fixed
Focal Length	2.8 mm
Aperture	F2.0
Video Compression	H.264, MJPEG
Audio Capability	Two-way audio
Day/Night	Yes
Minimum Illumination	0.5 Lux @ F2.0 (Color)
IR Illuminators	Yes
Maximum Frame Rate	30 fps
Audio Compression	G.711, G.726
Ethernet	10/100Base-T
Protocols	IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, CoS, QoS, SNMP, 802.1X
Local Storage	MicroSD/SDHC/SDXC card slot
Operating Temperature	-10°C ~ 50°C (14°F ~ 122°F)
Power Supply	12V DC
Shutter Time	1/5 sec to 1/32, 000 sec