Vivotek FE8172V User Manual

VIVOTEK
62 - User's Manual
Click the stream item to display the detailed information.
This Network Camera offers real-time SVC, H.264, MPEG-4 and MJPEG compression standards (Triple
Codec) for real-time viewing.
If H.264 or MPEG-4 mode is selected, the video is streamed via RTSP protocol. There are four
parameters for you to adjust the video performance:
■ Frame size
You can set up different video resolution for different viewing devices. For example, set a smaller
frame size and lower bit rate for remote viewing on mobile phones and a larger video size and a higher
bit rate for live viewing on web browsers. Note that a larger frame size takes up more bandwidth.
■ Maximum frame rate
This limits the maximum refresh frame rate per second. Set the frame rate higher for smoothlier video
quality.
Regardless of the power line frequency setting (60Hz or 50Hz), the frame rates are selectable at 1fps,
2fps, 3fps, 5fps, 8fps, 10fps, and 15fps. You can also select Customize and manually enter a value.

Vivotek FE8172V Specifications

General

Maximum Resolution	1920x1080
Lens Type	Fixed
Focal Length	2.8 mm
Aperture	F2.0
Video Compression	H.264, MJPEG
Audio Capability	Two-way audio
Day/Night	Yes
Minimum Illumination	0.5 Lux @ F2.0 (Color)
IR Illuminators	Yes
Maximum Frame Rate	30 fps
Audio Compression	G.711, G.726
Ethernet	10/100Base-T
Protocols	IPv4, IPv6, TCP/IP, HTTP, HTTPS, UPnP, RTSP/RTP/RTCP, IGMP, SMTP, FTP, DHCP, NTP, DNS, DDNS, PPPoE, CoS, QoS, SNMP, 802.1X
Local Storage	MicroSD/SDHC/SDXC card slot
Operating Temperature	-10°C ~ 50°C (14°F ~ 122°F)
Power Supply	12V DC
Shutter Time	1/5 sec to 1/32, 000 sec