Vivotek FE8174 - Page 155

VIVOTEK
User's Manual - 155
oin_resolution
s<0~(m-1)>_mpeg4_intrap
eriod
250, 500,
1000, 2000,
3000, 4000
1000 4/4 Intra frame period in
milliseconds.
s<0~(m-1)>_mpeg4_bitrate
restriction
average,
upperbound
average 4/4 “average” indicates the
average bit rate will be equal
to its target bit rate.
“upperbound” indicates the
bit rate will always not
exceed its target bit rate.
s<0~(m-1)>_mpeg4_priorit
ypolicy
framerate,
imagequality
framerate 4/4 The policy to apply when the
target bit rate is not
sufficient to satisfy current
encoded conditions.
“framerate” indicates frame
rate first.
“imagequality” indicates
image quality first.
s<0~(m-1)>_mpeg4_rateco
ntrolmode
cbr, vbr cbr 4/4 cbr, constant bitrate
vbr, fix quality
s<0~(m-1)>_mpeg4_quant 1~5
99, 100
3 4/4 Quality of video when
choosing vbr in
“ratecontrolmode”.
99 is the customized manual
input setting.
1 = worst quality, 5 = best
quality.
100 is percentage mode.
s<0~(m-1)>_mpeg4_qvalue 2~31 7 4/4 Manual video quality level
input.
(s<0~(m-1)>_mpeg4_quan
t = 99)
s<0~(m-1)>_mpeg4_qperce
nt
1~100 29 4/4 Manual video quality level
input.
(s<0~(m-1)>_mpeg4_quan
t = 100)
s<0~(m-1)>_mpeg4_bitrate 1000~160000
00
<product
dependent>
4000000 4/4 Set bit rate in bps when
choosing cbr in
“ratecontrolmode”.