Vivotek FE8174 User Manual

VIVOTEK
User's Manual - 169
7.22 System log
Group: syslog
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
enableremotelog <boolean> 0 6/6 Enable remote log.
serverip <IP address> <blank> 6/6 Log server IP address.
serverport 514,
1025~65535
514 6/6 Server port used for log.
level 0~7 6 6/6 Levels used to distinguish the
importance of the
information:
0: LOG_EMERG
1: LOG_ALERT
2: LOG_CRIT
3: LOG_ERR
4: LOG_WARNING
5: LOG_NOTICE
6: LOG_INFO
7: LOG_DEBUG
setparamlevel 0~2 0 6/6 Show log of parameter
setting.
0: disable
1: Show log of parameter
setting set from external.
2. Show log of parameter
setting set from external and
internal.
7.23 camera PTZ control
Group: camctrl (capability.camctrl.httptunnel > 0)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
enablehttptunnel <boolean> 0 4/4 Enable HTTP tunnel for
camera control.
Group: camctrl_c<0~(n-1)> for n channel product (capability.ptzenabled)
NAME VALUE DEFAULT SECURITY DESCRIPTION

Vivotek FE8174 Specifications

General

Type	IP security camera
PTZ control	Yes
Placement supported	Indoor
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	1
Signal-to-Noise Ratio (SNR)	62 dB
Form factor	Dome
Mounting type	Ceiling
Product color	White
Maximum resolution	2560 x 1920 pixels
Supported video modes	-
Video formats supported	H.264, MPEG4
Power source type	PoE
Minimum illumination	0.03 lx
Sensor type	CMOS
Digital zoom	12 x
Built-in HDD	No
Flash memory	128 MB
Internal memory	256 MB
Compatible memory cards	MicroSD (TransFlash), MicroSDHC, MicroSDXC

Weight and Dimensions

Length	34 mm
Weight	358 g
Diameter	139 mm