Vivotek FE8174 - Page 180

VIVOTEK
180 - User's Manual
Bit 1 => stream 2 supports ePTZ
or not.
The rest may be deduced by
analogy
nanystream 0, <positive
integer>
0 0/7 number of any media stream per
channel
iva <boolean> 0 0/7 Indicate whether to support
Intelligent Video analysis
tampering <boolean> 1 0/7 Indicate whether to support
tampering detection.
test_ac <boolean> 1 0/7 Indicate whether to support test
ac key.
version_onvifdaemo
n
<string> 1.7.1.4 0/7 Indicate ONVIF daemon version
image_wdrc <Boolean> 1 0/7 Indicate whether to support WDR
enhanced.
image_ iristype <string> 0/7 Indicate iris type.
image_ focusassist <Boolean> 0 0/7 Indicate whether to support focus
assist.
fisheye <Boolean> 1 0/7 Indicate fisheye model.
localstorage_manag
eable
<boolean> 1 0/7 Indicate whether manageable
local storage is supported.
localstorage_seamle
ss
<boolean> 1 0/7 Indicate whether seamless
recording is supported.
localstorage_modnu
m
0,
<positive integer>
4 0/7 The maximum MOD connection
numbers.
adaptiverecording <boolean> 1 0/7 Indicate whether to support
adaptive recording.
adaptivestreaming <boolean> 1 0/7 Indicate whether to support
adaptive streaming.
supportsd <boolean> 1 0/7 Indicate whether to support local
storage.
vadp <positive integer> 19 0/7 An 32-bit integer, each bit can be
set separately as follows:
Bit 0 => VADP Interface
Bit 1 => Capture video raw data
Bit 2 => Support encode jpeg
Bit 3 => Audio
Bit 4 => Event