Vivotek FE8174 User Manual

VIVOTEK
76 - User's Manual
URL command -- http://<ip address>:<http port>/<access name for stream 1 ~ 5>
For example, when the Access name for stream 2 is set to video2.mjpg:
1. Launch Mozilla Firefox or Netscape.
2. Type the above URL command in the address bar. Press Enter.
3. The JPEG images will be displayed in your web browser.
IMPORTANT:
► Microsoft
®
Internet Explorer does not support server push technology; therefore, using http://<ip
address>:<http port>/<access name for stream 1 ~ 3> will fail to access the Network Camera.
► Users can only use URL commands to request the stream 5. For more information about URL
commands, please refer to page 133.
RTSP Streaming
To utilize RTSP streaming authentication, make sure that you have set a password for the Network
Camera rst; please refer to Security > User account on page 86 for details.
http://192.168.5.151/video2.mjpg

Vivotek FE8174 Specifications

General

Type	IP security camera
PTZ control	Yes
Placement supported	Indoor
Connectivity technology	Wired
Ethernet LAN (RJ-45) ports	1
Signal-to-Noise Ratio (SNR)	62 dB
Form factor	Dome
Mounting type	Ceiling
Product color	White
Maximum resolution	2560 x 1920 pixels
Supported video modes	-
Video formats supported	H.264, MPEG4
Power source type	PoE
Minimum illumination	0.03 lx
Sensor type	CMOS
Digital zoom	12 x
Built-in HDD	No
Flash memory	128 MB
Internal memory	256 MB
Compatible memory cards	MicroSD (TransFlash), MicroSDHC, MicroSDXC

Weight and Dimensions

Length	34 mm
Weight	358 g
Diameter	139 mm