Vivotek FE8191 - Page 206

VIVOTEK
206 - User's Manual
7.42 Panoramic PTZ settings
Group:ivas_c0 (capability_remotecamctrl_master > 0)
PARAMETER VALUE Default SECURITY
(get/set)
DESCRIPTION
enable <boolean> 1 6/6 Enable intelligence video analysis
Group:ivas_c0_objtrack (capability_remotecamctrl_master > 0)
PARAMETER VALUE Default SECURITY
(get/set)
DESCRIPTION
enable <boolean> 0 6/6 Enable object tracking analytics
objsize 0~10000,0~1
0000
312,312 6/6 Minimal detected object size.
Value="width,height". The value is the
proportion of object in image size and
expands to 10000.
sensitivity 0~10000 6000 6/6 Sensitivity of object detection window.
win_i0_enable <boolean> 0 6/6 Enable this detection window
win_i0_name String[40] <blank> 6/6 Name of detection window
win_i0_polygon 0~10000 0,0,
10000,0,
10000,10000,
0,10000
6/6 Coordinate of polygon window position.
Valid coordinate number of polygon
points: 3~20.
Example:
(points:x0,y0,x1,y1,x2,y2,x3,y3, …)
Group:remotecamctrl_c0 (capability_remotecamctrl_master > 0)
PARAMETER VALUE Default SECURITY
(get/set)
DESCRIPTION
enable <boolean> 0 6/6 Enable Panoramic PTZ
Group:remotecamctrl_c0_client<0~(n-1)> (capability_remotecamctrl_master > 0)
PARAMETER VALUE Default SECURITY
(get/set)
DESCRIPTION
enable <boolean> 0 6/6 Enable Controller camera to control the
Auxiliary one.
createtime string[64] <blank> 6/99 The creative time of uploaded map file.
ip <ip address> <blank> 6/6 Ip address of Auxiliary camera.