upstream should be base64 encoded to be able to pass through some proxy server.
This channel will help to do real-time event notification and control. The event and control format are
described in another document.
Get SDP of Streamings
Note: This request requires viewer access privilege
Method: GET/POST
Syntax:
http://<servername>/<network_rtsp_s<0~m-1>_accessname>
“m” is the stream number.
“network_accessname_<0~(m-1)>” is the accessname for stream “1” to stream “m”. Please refer to the
“subgroup of network: rtsp” for setting the accessname of SDP.
You can get the SDP by HTTP GET method.
Open the network streamings
Note: This request requires viewer access privilege
Syntax:
For http push server (mjpeg):
http://<servername>/<network_http_s<0~m-1>_accessname>
For rtsp (mp4), user needs to input the url below for a rtsp compatible player.
rtsp://<servername>/<network_rtsp_s<0~m-1>_accessname>
“m” is the stream number.
For detailed streaming protocol, please refer to “control signaling” and “data format” documents.
To Next Page
Loading...
