URL command -- http://<ip address>:<http port>/<access name for stream1 or stream2>
For example, when the Access name for stream 2 is set to video2�mjpg:
1. Launch Mozilla Firefox or Netscape.
2� Type the URL command in the address bar� Press Enter�
3. The JPEG images will be displayed in your web browser.
NOTE
► Microsoft
®
Internet Explorer does not support server push technology; therefore, using http://<ip
address>:<http port>/<access name for stream1 or stream2> will fail to access the Network Camera�
HTTPS
By default, the HTTPS port is set to 443� It can also be assigned to another port number between 1025
and 65535�
FTP
The FTP server allows the user to save recorded video clips. You can utilize VIVOTEK Installation Wizard
2 to upgrade the rmware via FTP server. By default, the FTP port is set to 21. It also can be assigned to
another port number between 1025 and 65535�
To Next Page
Loading...
