Vivotek IP7361 - Page 159

VIVOTEK
User's Manual - 159
tele Zoom further with current speed.
zooming wide or tele Zoom without stopping for larger view or further view with zs speed, used for
joystick control.
zs 0 ~ 6 Set the speed of zooming, “0” means stop.
vx <integer>
vy <integer>
The direction of movement, used for joystick control.
vs 0 ~ 7 Set the speed of movement, “0” means stop.
speedpan -5 ~ 5 Set the pan speed.
speedtilt -5 ~ 5 Set the tilt speed.
speedzoom -5 ~ 5 Set the zoom speed.
speedapp 1 ~ 5 Set the auto pan/patrol speed.
return <return page> Redirect to the page <return page> after the parameter is assigned. The
<return page> can be a full URL path or relative path according to the current
path.
6.13 Recall (capability.ptzenabled=1)
Note: This request requires Viewer privileges.
Method: GET
Syntax:
http://<servername>/cgi-bin/viewer/recall.cgi?
recall=<value>[&channel=<value>][&return=<return page>]
PARAMETER VALUE DESCRIPTION
recall Text string less than 30 characters One of the present positions to recall.
channel <0~(n-1)> Channel of the video source.
return <return page> Redirect to the page <return page> after the parameter
is assigned. The <return page> can be a full URL path or
relative path according to the current path. If you omit
this parameter, it will redirect to an empty page.
6.14 ePTZ Recall
Note: This request requires camctrl privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/camctrl/eRecall.cgi?channel=<value>&stream=<value>&