Vivotek IP816A-LPC - Page 185

VIVOTEK
User's Manual - 185
saturationpercent 0~100 50 4/4 Adjust saturation value of percentage
when saturation=100
contrastpercent 0~100 50 4/4 Adjust contrastpercent of image
sharpnesspercent 0~100 50 4/4 Adjust sharpnessvalue of percentage
when sharpness=100
gammacurve 0~100 0 4/4 Gamma curve.
lowlightmode <boolean> 1 4/4 Enable/disable low light mode.
dnr_mode 0~1 1/0 4/4 0:disable
1:enable
Note: default dnrmode value is product
dependent.
HP is 1.
LPC(Parkinglot) is 0.
LPC(Street) is 0.
dnr_strength 1~100 50 4/4 Strength of DNR
eis 0~1 0 4/4 Electronic image stabilizer
0:disable
1:enable
scene_enable 0~1 1 4/4 Scene mode
0: disable
1: enable
* Only available when
"capability_image_c<n>_scenemode_s
upport" is 1
scene_mode lpcstreet,
lpcparkinglot
lpcstreet
or
lpcparkin
glot
4/4 Value of scene mode
* DEFAULT is according to
"system_info_extendedmodelname"
If it is "IP816A-LPC(Street)", DEFAULT is
lpcstreet.
If it is "IP816A-LPC(Parking)", DEFAULT
is lpcparkinglot.
* Only available when
"capability_image_c<n>_scenemode_s
upport" is 1
profile_i0_enable <boolean> 0/1 4/4 Enable/disable this profile setting
Note: default value is product
dependent.
HP is 0.
LPC(Parkinglot) is 1.
LPC(Street) is 1.