Vivotek IP816A-LPC - Page 186

VIVOTEK
186 - User's Manual
profile_i0_policy day,
night,
schedule
night 4/4 The mode which the profile is applied to.
profile_i0_begintime hh:mm 18:00 4/4 Begin time of schedule mode.
profile_i0_endtime hh:mm 06:00 4/4 End time of schedule mode.
profile_i0_brightness -5~5,100 100 4/4 Adjust brightness of image according to
mode settings.
profile_i0_saturation -5~5,100 100 4/4 Adjust saturation of image according to
mode settings.
profile_i0_contrast -5~5,100 100 4/4 Adjust contrast of image according to
mode settings.
profile_i0_sharpness -3~3,100 100 4/4 Adjust sharpness of image according to
mode settings.
profile_i0_brightnessperce
nt
0~100 0 4/4 Adjust brightnesspercent of image
profile_i0_contrastpercent 0~100 50 4/4 Adjust contrastpercent of image
profile_i0_saturationperce
nt
0~100 50 4/4 Adjust saturationpercent of image
profile_i0_sharpnessperce
nt
0~100 50 4/4 Adjust sharpnesspercentvalue of image
profile_i0_gammacurve 0~100 0 4/4 Gamma curve.
profile_i0_lowlightmode <boolean> 1 4/4 Enable/disable low light mode.
profile_i0_dnr_mode 0~1 1/0 4/4 0:disable
1:enable
Note: default dnrmode value is product
dependent.
HP is 1.
LPC(Parkinglot) is 0.
LPC(Street) is 0.
profile_i0_dnr_strength 1~100 50 4/4 Strength of DNR
profile_i0_eis 0~1 0 4/4 Electronic image stabilizer
0:disable
1:enable
profile_i0_scene_enable 0~1 1 4/4 Scene mode
0: disable
1: enable
* Only available when
"capability_image_c<n>_scenemode_s