Vivotek IP8335H - Page 130

VIVOTEK
130 - User's Manual
It‟s recommended to set this parameter when
change a service port to the port occupied by
another service currently. Otherwise, the service
may fail.
Stopped service will auto-start after changing port
settings.
Ex:
Change HTTP port from 80 to 5556, and change
RTP port for video from 5556 to 20480.
Then, set preprocess=9 to stop both service first.
”/cgi-bin/admin/setparam.cgi?
network_preprocess=9&network_http_port=555
6& network_rtp_videoport=20480”
type lan,
pppoe
lan 6/6 Network connection type.
resetip <boolean> 1 6/6 1 => Get ipaddress, subnet, router, dns1, dns2
from DHCP server at next reboot.
0 => Use preset ipaddress, subnet, rounter, dns1,
and dns2.
ipaddress <ip
address>
<product
dependent>
6/6 IP address of server.
subnet <ip
address>
<blank> 6/6 Subnet mask.
router <ip
address>
<blank> 6/6 Default gateway.
dns1 <ip
address>
<blank> 6/6 Primary DNS server.
dns2 <ip
address>
<blank> 6/6 Secondary DNS server.
wins1 <ip
address>
<blank> 6/6 Primary WINS server.
wins2 <ip
address>
<blank> 6/6 Secondary WINS server.