Vivotek IP8335H - Camera Ptz Control

VIVOTEK
150 - User's Manual
7.22 camera PTZ control
Group: camctrl_c<0~(n-1)> for n channel product (capability.ptzenabled)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
panspeed -5 ~ 5 0 1/4 Pan speed
tiltspeed -5 ~ 5 0 1/4 Tilt speed
zoomspeed -5 ~ 5 0 1/4 Zoom speed
focusspeed -5 ~ 5 0 1/4 Auto focus speed
patrolseq string[120] <blank> 1/4 (For external device)
The indexes of patrol
points, separated by “,”
patroldwelling string[160] <blank> 1/4 (For external device)
The dwelling time of each
patrol point, separated by
“,”
preset_i<0~(npreset-1)>_name string[40] <blank> 1/4 Name of the preset
location.
uart 0 ~ (m-1),
m is UART
count
0 1/4 Select corresponding uart
(capability.nuart>0).
cameraid 0~255 1 1/4 Camera ID controlling
external PTZ camera.
isptz 0 ~ 2 0 1/4 0: disable PTZ commands.
1: enable PTZ commands
with PTZ driver.
2: enable PTZ commands
with UART tunnel.
disablemdonptz <boolean> 0 1/4 Disable motion detection on
PTZ operation.
7.23 UART control
Group: uart (capability.nuart > 0)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
ptzdrivers_i<0~19,
127>_name
string[40] <product
dependent>
1/4 Name of the PTZ driver.