EasyManua.ls Logo

Vivotek IP8335H - Page 151

Vivotek IP8335H
197 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VIVOTEK
User's Manual - 151
7.22 camera PTZ control
Group: camctrl_c<0~(n-1)> for n channel product (capability.ptzenabled)
NAME
VALUE
DEFAULT
SECURITY
(get/set)
DESCRIPTION
panspeed
-5 ~ 5
0
1/4
Pan speed
tiltspeed
-5 ~ 5
0
1/4
Tilt speed
zoomspeed
-5 ~ 5
0
1/4
Zoom speed
focusspeed
-5 ~ 5
0
1/4
Auto focus speed
patrolseq
string[120]
<blank>
1/4
(For external device)
The indexes of patrol
points, separated by,
patroldwelling
string[160]
<blank>
1/4
(For external device)
The dwelling time of each
patrol point, separated by
“,
preset_i<0~(npreset-1)>_name
string[40]
<blank>
1/4
Name of the preset
location.
uart
0 ~ (m-1),
m is UART
count
0
1/4
Select corresponding uart
(capability.nuart>0).
cameraid
0~255
1
1/4
Camera ID controlling
external PTZ camera.
isptz
0 ~ 2
0
1/4
0: disable PTZ commands.
1: enable PTZ commands
with PTZ driver.
2: enable PTZ commands
with UART tunnel.
disablemdonptz
<boolean>
0
1/4
Disable motion detection on
PTZ operation.
7.23 UART control
Group: uart (capability.nuart > 0)
NAME
VALUE
DEFAULT
SECURITY
(get/set)
DESCRIPTION
ptzdrivers_i<0~19,
127>_name
string[40]
<product
dependent>
1/4
Name of the PTZ driver.
ptzdrivers_i<0~19,
127>_location
string[128] < product
dependent >
1/4 Full path of the PTZ driver.
enablehttptunnel <boolean> 0 4/4 Enable HTTP tunnel channel to
control UART.
Group: uart_i<0~(n-1)> n is uart port count (capability.nuart > 0)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
baudrate 110,300,600,120
0,2400,3600,480
0,7200,9600,192
00,38400,57600,
115200
9600 4/4 Set baud rate of COM port.
databit 5,6,7,8 8 4/4 Data bits in a character frame.
paritybit none,
odd,
even
none 4/4 For error checking.
stopbit 1,2 1 4/4 1
2-1.5 , data bit is 5
2-2
uartmode rs485,
rs232
rs485 4/4 RS485 or RS232.
customdrvcmd_i<0~
9>
string[128] <blank> 1/4 PTZ command for custom
camera.
speedlink_i<0~4>_n
ame
string[40] <blank> 1/4 Additional PTZ command name.
speedlink_i<0~4>_c
md
string[128] <blank> 1/4 Additional PTZ command list.
ptzdriver 0~19,
127 (custom),
128 (no driver)
128
(no driver)
4/4 The PTZ driver is used by this
COM port.

Table of Contents

Other manuals for Vivotek IP8335H

Related product manuals