Vivotek IP8335H - System Log

VIVOTEK
User's Manual - 149
<provider>_us
ernameemail
string[64]
<blank>
6/6
Your user name or email to login to
the DDNS service provider
<provider>_pa
sswordkey
string[64]
<blank>
6/6
Your password or key to login to the
DDNS service provider.
<provider>_se
rvername
string[128]
<blank>
6/6
The server name for safe100.
(This field only exists if the provider is
customsafe100)
7.18 Express link
Group: expresslink
PARAMETER
VALUE
Default
SECURITY
(get/set)
DESCRIPTION
enable
<boolean>
0
6/6
Enable or disable express link.
state
onlycheck,
onlyoffline,
checkonline,
badnetwork
NULL
6/6
Camera will check the status of network
environment and express link URL
url
string[63]
NULL
6/6
The url user define to link to camera
7.19 UPnP presentation
Group: upnppresentation
NAME
VALUE
DEFAULT
SECURITY
(get/set)
DESCRIPTION
enable
<boolean>
1
6/6
Enable or disable the UPnP
presentation service.
7.20 UPnP port forwarding
Group: upnpportforwarding
NAME
VALUE
DEFAULT
SECURITY
(get/set)
DESCRIPTION
enable
<boolean>
0
6/6
Enable or disable the UPnP port
forwarding service.
upnpnatstatus
0~3
0
6/7
The status of UPnP port forwarding,
used internally.
0 = OK, 1 = FAIL, 2 = no IGD
router, 3 = no need for port
forwarding
7.21 System log
Group: syslog
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
enableremotelog <boolean> 0 6/6 Enable remote log.
serverip <IP address> <blank> 6/6 Log server IP address.
serverport 514,
1025~65535
514 6/6 Server port used for log.
level 0~7 6 6/6 Levels used to distinguish the
importance of the
information:
0: LOG_EMERG
1: LOG_ALERT
2: LOG_CRIT
3: LOG_ERR
4: LOG_WARNING
5: LOG_NOTICE
6: LOG_INFO
7: LOG_DEBUG
setparamlevel 0~2 0 6/6 Show log of parameter
setting.
0: disable
1: Show log of parameter
setting set from external.
2. Show log of parameter
setting set from external and
internal.