Vivotek IP8335H - Eptz Setting

VIVOTEK
User's Manual - 169
information.
stateorprovincename
string[128]
Asia
6/6
State or province name in the
certificate information.
localityname
string[128]
Asia
6/6
The locality name in the
certificate information.
organizationname
string[64]
VIVOTEK.Inc
6/6
Organization name in the
certificate information.
unit
string[32]
VIVOTEK.Inc
6/6
Organizational unit name in the
certificate information.
commonname
string[64]
www.vivotek.
com
6/6
Common name in the certificate
information.
validdays
0 ~ 3650
3650
6/6
Valid period for the certification.
7.34 Storage management setting
Currently it‟s for local storage (SD, CF card)
Group: disk_i<0~(n-1)> n is the total number of storage devices. (capability.storage.dbenabled > 0)
PARAMETER
VALUE
Default
SECURITY
(get/set)
DESCRIPTION
cyclic_enabled
<boolean>
0
6/6
Enable cyclic storage method.
autocleanup_enabled
<boolean>
0
6/6
Enable automatic clean up method.
Expired and not locked media files will
be deleted.
autocleanup_maxage
<positive
integer>
7
6/6
To specify the expired days for
automatic clean up.
7.35 Region of interest
Group: roi_c<0~(n-1)> for n channel product, and m is the number of streams which support ROI.
(capability.eptz > 0)
PARAMETER
VALUE
Default
SECURITY
(get/set)
DESCRIPTION
s<0~(m-1)>_home
<coordinate>
0,0
6/6
ROI left-top corner coordinate.
s<0~(m-1)>_size
<window size>
1280x800
6/6
ROI width and height. The width
value must be multiples of 16 and the
height value must be multiples of 8
7.36 ePTZ setting
Group: eptz_c<0~(n-1)> for n channel product. (capability.eptz > 0)
PARAMETER VALUE Default SECURITY
(get/set)
DESCRIPTION
osdzoom <boolean> 1 1/4 Indicates multiple of zoom in is
“on-screen display” or not
smooth <boolean> 1 1/4 Enable the ePTZ "move smoothly"
feature
tiltspeed -5 ~ 5 0 1/7 Tilt speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
panspeed -5 ~ 5 0 1/7 Pan speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
zoomspeed -5 ~ 5 0 1/7 Zoom speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
autospeed 1 ~ 5 1 1/7 Auto pan/patrol speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
Group: eptz_c<0~(n-1)>_s<0~(m-1)> for n channel product and m is the number of streams which
support ePTZ. (capability.eptz > 0)
PARAMETER VALUE Default SECURITY
(get/set)
DESCRIPTION
patrolseq string[120] <blank> 1/4 The patrol sequence of ePTZ. All the
patrol position indexes will be
separated by ","
patroldwelling string[160] <blank> 1/4 The dwelling time (unit: second) of
each patrol point, separated by “,”.
preset_i<0~19>_name string[40] <blank> 1/7 Name of ePTZ preset.
(It should be set by ePreset.cgi rather
than by setparam.cgi.)
preset_i<0~19>_pos <coordinate> <blank> 1/7 Left-top corner coordinate of the
preset.
(It should be set by ePreset.
cgi rather
than by setparam.cgi.)