Vivotek IP8335H - Page 193

VIVOTEK
User's Manual - 193
8. 24 Open Anystream (capability.nanystream > 0)
Note: This request requires Viewer access privileges.
Syntax:
For HTTP push server (MJPEG):
http://<servername>/videoany.mjpg?codectype=mjpeg[&resolution=<value>&mjpeg_quant=<value>&
mjpeg_qvalue=<value>&mjpeg_maxframe=<value>]
For RTSP (MPEG4), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/liveany.sdp?codectype=mpeg4[&resolution=<value>&mpeg4_intraperiod=<value>
&mpeg4_ratecontrolmode=<value>&mpeg4_quant=<value>&mpeg4_qvalue=<value>&mpeg4_bitrate=
<value>&mpeg4_maxframe=<value>]
For RTSP (H264), the user needs to input the URL below into an RTSP compatible player.
rtsp://<servername>/liveany.sdp?codectype=h264[&resolution=<value>&h264_intraperiod=<value>&
h264_ratecontrolmode=<value>& h264_quant=<value>& h264_qvalue=<value>&
h264_bitrate=<value>& h264_maxframe=<value>]
<product dependent>
PARAMETER
VALUE
DEFAULT
DESCRIPTION
codectype
mjpeg, mpeg4, h264
<product dependent>
N/A
Set codec type for Anystream.
solution
capability_videoin_resolution
<product
dependent>
Video resolution in pixels.
mjpeg_quant
0, 1~5
99, 1~5
<product dependent>
3
Quality of JPEG video.
0,99 is the customized manual input
setting.
1 = worst quality, 5 = best quality.
<product dependent>
mjpeg_qvalue
10~200
2~97
<product dependent>
50
<product
dependent>
Manual video quality level input.
(This must be present if mjpeg_quant
is equal to 0, 99)
<product dependent>
mjpeg_maxframe
1~25,
26~30 (only for NTSC or
60Hz CMOS)
15
Set maximum frame rate in fps (for
JPEG).
mpeg4_intraperiod
250, 500, 1000, 2000, 3000,
4000
1000
Intra frame period in milliseconds.
mpeg4_ratecontrolmode
cbr, v b r vbr cbr: constant bitrate
vbr: fix quality
mpeg4_quant 0, 1~5
99, 1~5
<product dependent>
3
Quality of video when choosing vbr in
“mpeg4_ratecontrolmode”.
0,99 is the customized manual input
setting.
1 = worst quality, 5 = best quality.
<product dependent>
mpeg4_qvalue 1~31
2~31
<product dependent>
7
<product
dependent>
Manual video quality level input.
(This must be present if mpeg4_quant
is equal to 0, 99)
<product dependent>
<product dependent>
mpeg4_bitrate 1000~8000000
1000~4000000
<product dependent>
512000
<product
dependent>
Set bit rate in bps when choosing cbr
in “mpeg4_ratecontrolmode”.
mpeg4_maxframe 1~25,
26~30 (only for NTSC or
60Hz CMOS)
10
15
<product
dependent>
Set maximum frame rate in fps (for
MPEG-4).
h264_intraperiod 250, 50
0, 1000, 2000, 3000,
4000
1000 Intra frame period in milliseconds.
h264_ratecontrolmode cbr, vbr vbr cbr: constant bitrate
vbr: fix quality
h264_quant 0, 1~5
99, 1~5
<product dependent>
3
Quality of video when choosing vbr in
“h264_ratecontrolmode”.
0,99 is the customized manual input
setting.
1 = worst quality, 5 = best quality.
<product dependent>
h264_qvalue 0~51
<product dependent>
30
<product
dependent>
Manual video quality level input.
(This must be present if h26
4_quant is
equal to 0, 99)
<product dependent>
h264_bitrate 1000~8000000
1000~4000000
<product dependent>
512000
<product
dependent>
Set bit rate in bps when choosing cbr
in “h264_ratecontrolmode”.
h264_maxframe 1~25,
26~30 (only for NTSC or
60Hz CMOS)
10
15
<product
Set maximum frame rate in fps (for
H264).