Vivotek PT8133 - Page 143

VIVOTEK
User's Manual - 143
7.19 SNMP
Group: snmp (capability.snmp > 0) (product dependent)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
v2 <boolean> 0 6/6 SNMP v2 enabled. 0 for
disable, 1 for enable
v3 <boolean> 0 6/6 SNMP v3 enabled. 0 for
disable, 1 for enable
secnamerw string[31] Private 6/6 Read/write security name
secnamero string[31] Public 6/6 Read only security name
authpwrw string[8~128] <blank> 6/6 Read/write authentication
password
authpwro string[8~128] <blank> 6/6 Read only authentication
password
authtyperw MD5,SHA MD5 6/6 Read/write authentication
type
authtypero MD5,SHA MD5 6/6 Read only authentication
type
encryptpwrw string[8~128] <blank> 6/6 Read/write passwrd
encryptpwro string[8~128] <blank> 6/6 Read only password
encrypttyperw DES <blank> 6/6 Read/write encryption
type
encrypttypero DES <blank> 6/6 Read only encryption type
rwcommunity string[31] Private 6/6 Read/write community
rocommunity string[31] Public 6/6 Ready only community
syslocation string[128] <blank> 6/6 Description of Camera
location (Ex. Address)
syscontact string[128] <blank> 6/6 Description of Camera
contactor (Ex. E-mail)