Vivotek PT8133 - Hardware Installation

VIVOTEK
6 - User's Manual
Hardware Installation
2
Mounting the Network Camera - Ceiling Mount
1. Use the holes on the mount bracket as a template to mark where holes will be drilled on the ceiling.
Drill two holes into the ceiling; and hammer in the plastic anchors.
2. Attach the Network Camera to the mount bracket using two athead screws.
3. Secure mount bracket to the ceiling using two panhead screws.
4. You can now proceed with cabling.
• If you prefer wireless conguration, you can
congure wireless connection before you
mount the camera to bracket.
• The camera can cover a wide surveillance
area with its pan and tilt angles. Aim the
camera orientation toward area of interest.
NOTE:
Vertical Tilt
125° (-35° ~ +90°)
Horizontal Pan 350°