Vivotek PT8133 - Recording

VIVOTEK
User's Manual - 99
Recording
Advanced Mode
This section explains how to congure the recording settings for the Network Camera.
Recording Settings
► Before setting up this page, please set up the Network Storage on the Server Settings (Add Server)
page rst.
Network Storage Setting
Click Server on the message bar to open the Server Settings page (if you have not) and follow the steps
below to set up:
1. Fill in the information for your server.
For example:
2. Click Test to check the setting. The result will be shown in the pop-up window.
1
2
3
4
Network storage path
(\\server name or IP address\folder name)
User name and password for your server
NOTE: