Vivotek PT8133 - Page 149

VIVOTEK
User's Manual - 149
commas)
uart_httptunnel <boolean> 0 0/7 Indicate whether to support
HTTP tunnel for UART
transfer.
camctrl_httptunnel <boolean> 0 0/7 Indicate whether to support
httptunnel.
camctrl_httptunnelclient <boolean> 0 0/7 Indicate whether to support
httptunnel client.
camctrl_privilege <boolean> 1 0/7 Indicate whether to support
“Manage Privilege” of PTZ
control in the Security
page.
transmission_mode Tx,
Rx,
Both
Tx 0/7 Indicate transmission mode
of the machine: TX =
server, Rx = receiver box,
Both = DVR.
network_wire <boolean> 1 0/7 Indicate whether to support
Ethernet.
network_wireless <boolean> <product
dependent
>
0/7 Indicate whether to support
wireless.
wireless_s802dot11b <boolean> <product
dependent
>
0/7 Indicate whether to support
wireless 802.11b+.
wireless_s802dot11g <boolean> <product
dependent
>
0/7 Indicate whether to support
wireless 802.11g.
wireless_s802dot11n <boolean> <product
dependent
>
0/7 Indicate whether to support
wireless 802.11g.
wireless_beginchannel 1 ~ 14 1 0/7 Indicate the begin channel
of wireless network
wireless_endchannel 1 ~ 14 13 0/7 Indicate the end channel of
wireless network
wireless_encrypt_wep <boolean> <product
dependent
>
0/7 Indicate whether to support
wireless WEP.
wireless_encrypt_wpa <boolean> <product
dependent
0/7 Indicate whether to support
wireless WPA.