Vivotek PT8133 - Page 165

VIVOTEK
User's Manual - 165
vy <integer>
vs 0 ~ 7
0 ~ 15 <SD81X1>
Set the speed of movement, “0” means stop.
x <integer> x-coordinate clicked by user.
It will be the x-coordinate of center after movement.
y <integer> y-coordinate clicked by user.
It will be the y-coordinate of center after movement.
videosize <window size> The size of plug-in (ActiveX) window in web page
resolution <window size> The resolution of streaming.
stretch <boolean> 0 indicates that it uses resolution (streaming size) as the range
of the coordinate system.
1 indicates that it uses videosize (plug-in size) as the range of
the coordinate system.
speedlink 0 ~ 4 Issue speed link command.
gaptime 0~32768 The gaptime between two consecutive ptz commands for device.
(unit: ms)
return <return page> Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or relative
path according to the current path. If you omit this parameter,
it will redirect to an empty page.