Vivotek SD8362E - Page 137

VIVOTEK
User's Manual - 137
s<0~(m-1)>_h264_bitrate 1000~160000
00
30000000 4/4 Set bit rate in bps when
choosing cbr in
“ratecontrolmode”.
s<0~(m-1)>_h264_maxfra
me
1~25,
26~30 (only
for NTSC or
60Hz CMOS)
30 1/4 Set maximum frame rate in
fps (for h264).
s<0~(m-1)>_h264_profile
<product dependent>
0~2 1 1/4 Indicate H264 profiles
0: baseline
1: main profile
2: high profile
s<0~(m-1)>_mjpeg_quant 1~5
99, 100
3 4/4 Quality of JPEG video.
99 is the customized
manual input setting.
1 = worst quality, 5 = best
quality.
100 is percentage mode.
s<0~(m-1)>_mjpeg_qvalue 2~97 50 4/4 Manual video quality level
input.
(s<0~(m-1)>_mjpeg_qua
nt = 99)
s<0~(m-1)>_mjpeg_qperce
nt
1~100 49 4/4 Manual video quality level
input.
(s<0~(m-1)>_mjpeg_qua
nt = 100)
s<0~(m-1)>_mjpeg_maxfra
me
1~25,
26~30 (only
for NTSC or
60Hz CMOS)
30 1/4 Set maximum frame rate in
fps (for JPEG).
daynight auto,schedule,
day,night
auto 4/4 auto => auto daynight
night => ircut filter on
day => ircut filter off
schedule => scheduled
ircut filter
exposurecontrol 0~3 0 4/4 Select exposure mode.
0 => Auto with IRCut
1 => Shutter priority
2 => Iris priority
3 => Manual mode
exposurelevel 0~12 6 4/4 Exposure level