VIVOTEK
User's Manual - 149
7.23 camera PTZ control
Group: camctrl_c<0~(n-1)> for n channel product (capability.ptzenabled)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
panspeed -5 ~ 5 0 1/4 Pan speed
tiltspeed -5 ~ 5 0 1/4 Tilt speed
zoomspeed -5 ~ 5 0 1/4 Zoom speed
autospeed -5 ~ 5 0 1/4 Auto pan speed
focusspeed -5 ~ 5 0 1/4 Auto focus speed
preset_i<0~(npreset-
1)>_name
string[40] <blank> 1/4 Name of the preset location.
preset_i<0~127>_
dwelling
0 ~ 255 <blank> 1/4 Dwelling time at each preset
location.
patrol_i<0~39>_nam
e
string[40] <blank> 1/4 (For internal device)
The name of patrol location
patrol_i<0~39>_
dwelling
0 ~ 255 <blank> 1/4 (For internal device)
The dwelling time of each patrol
location
disablemdonptz <boolean> 0 1/4 Disable motion detection on PTZ
operation.
defaulthome <boolean> 1 6/6 This field tells system to use
default home position or not.
digitalzoom <boolean> 0 6/6 Enable/disable digital zoom
idleaction_enable <integer> 0 1/4 Enable/disable idle action while
idle
idleaction_type pan, patrol,
home
pan 1/4 This field tells what kind of
action should be taken while
idle.
idleaction_interval <integer> 30 1/4 While idle over this time interval,
idle action will be taken.
horizontalalignment <boolean> 0 1/4 Once you enable this feature, a
reference line will be visible
when the camera tilt is under 0°
or over 180° to help verify that
the camera is mounted to a flat
surface.
To Next Page
Loading...
