Vivotek SD8362E - Page 141

VIVOTEK
User's Manual - 141
1: medium
2: high
(wdr_mode: 2)
7.10 IR cut control
Group: ircutcontrol (capability.nvideoinprofile > 0)
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
daymodebegintime 00:00~23:59 07:00 6/6 Day mode begin time
daymodeendtime 00:00~23:59 18:00 6/6 Day mod end time
sensitivity 0~28 14 6/6 Sensitivity of IR cut filter
7.11 Image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightness -5~5 -5 4/4 Adjust brightness of image
according to mode settings.
saturation -5~5 0 4/4 Adjust saturation of image
according to mode settings.
100 for saturation percentage
mode.
contrast -5 ~ 5 0 4/4 Adjust contrast of image
according to mode settings.
sharpness -3~3 0 4/4 Adjust sharpness of image
according to mode settings.
hightvline 0,1 0 4/4 High TV line
profile_i0_enable <boolean> 0 4/4 Enable/disable this profile
setting
profile_i0_policy day,
night,
schedule
night 4/4 The mode which the profile is
applied to.
profile_i0_begintime hh:mm 18:00 4/4 Begin time of schedule mode.
profile_i0_endtime hh:mm 06:00 4/4 End time of schedule mode.
profile_i0_contrast -5 ~ 5 0 4/4 Adjust contrast of image
according to mode settings.
profile_i0_sharpness -3~3 0 4/4 Adjust sharpness of image