EasyManuals Logo

Vivotek SD8362E User Manual

Vivotek SD8362E
192 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background imageLoading...
Page #63 background image
VIVOTEK
User's Manual - 63
Network > DDNS
This section explains how to configure the dynamic domain name service for the Network
Camera. DDNS is a service that allows your Network Camera, especially when assigned with a
dynamic IP address, to have a xed host and domain name.
Express link
Express Link is a free service provided by VIVOTEK server, which allows users to register a
domain name for a network device. One URL can only be mapped to one MAC address. This
service will check out if the host name is valid and automatically open a port on your router.
Unlike DDNS, the user has to manually check out UPnP port forwarding, Express Link is more
convenient and easy to set up.
Please follow the steps below to enable Express Link:
1. Make sure that your router supports UPnP port forwarding and it is activated, or you may see the
following warning message: “Express link is not supported under current network environment.
2. Check Enable express link.
3. Enter a host name for the network device and click Save. If the host name has been used by another
device, a warning message will show up. If the host name is valid, it will show a message as shown
below.
https://0002D1123456.2bthere.net

Table of Contents

Other manuals for Vivotek SD8362E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vivotek SD8362E and is the answer not in the manual?

Vivotek SD8362E Specifications

General IconGeneral
BrandVivotek
ModelSD8362E
CategorySecurity Camera
LanguageEnglish

Related product manuals