8 9
SAFETY INSTRUCTIONS
WARNING Rotating components in the application:
Risk of physical damage and destruction of the probe
• only operate the device in plant components and areas that are shut down
COUTION Light at probe head:
Possible damage to the eye/retina, risk of dazzling and temporary or
permanent loss of sight
• never look directly into the light at the probe head
ATTENTION Risk of overheating and/or short circuit:
Damage to device and environment
• always turn o the device after inspections and during work interruptions
and disconnect it from the mains power
ATTENTION Covering the base unit with a blanket or tarp:
Risk of damage to the device
• covering the base unit can impact the ventilation and cooling system of the
device, therefore it should never be covered when it is in use
ATTENTION Removing external data carriers (e.g. USB-sticks) while copying data:
Possible data loss or damage to the system
• make sure the data carrier is connected correctly
• wait until the process is nished before removing the carrier
ATTENTION Physical impact on connected USB-stick:
Possible damage to USB-device, slot and system
• avoid physical impact on the USB-device, especially when it is connected to
the VUMAN
• Always remove USB devices when you don‘t need them anymore
To Next Page
Loading...