viZaar VUMAN E3 - In Use

8
SAFETY INSTRUCTIONS
1.3.4 IN USE
ATTENTION Penetration of liquids (in test environment):
Possible damage to the probe
• check the probe externally for damage before using it
ATTENTION The water separator is full:
Possible damage to the probe muscles due to corrosion
• empty the water separator when the system reminds you to
ATTENTION Application and device have dierent operating temperatures:
Possible damage to the device / lower performance
• check the temperature of the application and the permissible temperature
of the device
ATTENTION Formation of condensation (e.g. when going from cold to warm environments):
Damage to or malfunctioning of the device caused due to voltage
ashover
• do not use the device when condensation has formed
• before putting into service, allow acclimatise to ambient temperature and
wait until it is dehumidied
WARNING Physical damage caused by insertion:
Internal injures
• never insert the probe or parts of the device into body orices of a human
or animal
WARNING Applications containing ammable gases/liquids and/or lots of dust:
Risk of re and explosion, risk of physical damage or death
• check the environment of the application
• do not use the device in ammable and explosive environments
WARNING Corossive chemicals:
Risk of physical damage and damage to the device
• check the application for corrosive elements
• do not insert the probe into corrosive chemicals
• never touch solvent based liquids with the probe