Vizio VW26L User Manual

VIZIO VW26L HDTV10F User Manual
Version 2/6/2007 15
www.VIZIO.com
2.2.2 Using Your Antenna or Cable for TV
1. Turn off the power to the HDTV.
2. Connect the coaxial (RF) connector from your antenna or cable (out-of-the-
wall, not from the Cable Box) to the DTV/TV CABLE/ANTENNA connector
at the rear of the HDTV
3. Turn on the power to the HDTV.
4. Select TV using the INPUT button on the remote or side of the HDTV, or
directly by pressing the TV button on the Remote Control.
2.2.3 Using the Antenna or Cable through your VCR
1. Turn off the power to the HDTV and VCR.
2. Connect the “Output to TV”, “RF Out” or “Antenna Out” connector on the
rear of your VCR to the DTV/TV CABLE/ANTENNA connector at the rear of
the HDTV.
3. Turn on the power to the HDTV and VCR.
4. Select TV using the INPUT button on the remote or side of the HDTV, or
directly by pressing the TV button on the Remote Control.
Note: If you have an off-air antenna or cable TV, connect
it to the “Antenna In” connector on the rear of your VCR.

Vizio VW26L Specifications

General

Brand	Vizio
Model	VW26L
Category	LCD TV
Language	English