VIZIO VW26L HDTV10F User Manual
Version 2/6/2007 20
www.VIZIO.com
2.5 Connecting Your DVD Player
2.5.1 Using HDMI
DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be
connected to the HDMI input of the VIZIO VW26L for optimal results.
Connecting your DVD Player (Best):
1. Turn off the power to the HDTV and DVD player.
2. Connect a HDMI cable to the HDMI output of your DVD
player and the other end to the HDMI 1 Input (white color
area) at the rear of the HDTV.
3. Turn on the power to the HDTV and DVD player.
4. Select HDMI 1 using the INPUT button on the remote or side
of the HDTV, or directly by pressing the HDMI button on the
Remote Control.
For DVD Players with DVI:
1. Turn off the HDTV and DVD player.
2. Using a HDMI-DVI cable, connect the DVI
end to your DVD player and the HDMI end
to the HDMI 2 Input (white color area) at the
rear of the HDTV.
3. Connect an audio cable (white and red
connectors) to the audio output connectors
associated with the DVI output of the DVD
player and connect the other end to the
audio connectors by the HDMI 2 input (white
area) at the rear of the HDTV.
4. Turn on the power to the HDTV and your
DVD player.
5. Select HDMI 2 using the INPUT button on
the remote or side of the HDTV, or directly
by pressing the HDMI button on the Remote.
Note: To maintain the display quality, use a VIZIO certified HDMI cable available up to 10 meters.
See www.VIZIO.com
or call 1-888-VIZIOCE (1-888-849-4623) for details.
Note: Refer to your DVD player user
manual for more information about the
video output requirements of the product.
To Next Page
Loading...
Need help?
General
