VIZIO
®
VW32L HDTV40A User Manual
Version 10/17/2008 34
www.VIZIO.com
2.12 Adjusting Basic HDTV Settings
Volume
To adjust the volume, press and hold the VOL+ or VOL-
button on the side of the LCD HDTV or remote control
until the desired level is reached.
TV Channels
To step up or down through the available TV channels,
press the CH+ or CH- button on the side of the HDTV
or remote control once for the next or previous channel,
or hold it depressed until the desired channel is reached.
Note: Channel up and down will only operate in DTV
and TV modes.
Wide
Using this feature, you can watch video content in different size modes on the
HDTV. Press the MENU button on the remote control to bring up the OSD
screen.
Press either the or button to select Setup (wrench look alike icon) options.
Press the button scroll down to Wide and select it.
Press either the or button to select among the modes.
For more information see Section 3.16.1 – Viewing Modes, on page 63.
2.13 Program Information
When you change TV channels or inputs or when the GUIDE key is pressed, an Information Banner is
displayed for a few seconds to tell you the status of the LCD HDTV.
TV Channel
Number
Program
Rating
Closed Caption
is available
NTSC SDTV (Standard Definition TV)
Audio is Stereo
Program Information:
Provided by Broadcaster
Station Name: provided
by Broadcaster
Source
is Cable
To Next Page
Loading...
Need help?
General
