Valvole brevettate per compressori rotativi a vite e pistoni
Patented valves for piston and screw rotary compressor
V.M.C. s.p.a. Via Palazzon 35 – 36051 Creazzo (VI) – ITALY
Internet www.vmcitaly.com - Phone +390444/521471 +390444/341115 - Fax
TIPO
TYPE
REVISIONE
REVISION
DATA
DATE
GRUPPO
LINE
ARTICOLO
ARTICLE
MODELLO
MODEL
Pagina 43 di 43
WARNING!
The machine where this product is assembled must comply with Directive 2006/42/CE.
The manufacturer is not liable for damages to people and/or objects caused by a misuse of the Pack Smart,
non-compliance or partial compliance with safety standards mentioned in this document, changes (even small
ones), tampering and use of non-original spare parts.
WARNING!
1) Before starting any operations, read this document carefully. The disregard of the
information herein contained can damage and injure people and things.
2) Use cylinder thread connections, unless otherwise indicated. If you do not, malfunctioning of
the product can be caused.
3) Installation and maintenance must be carried out only by qualified staff. Always comply with
current safety and accident prevention regulation.
4) Use suitable protective clothes during installation and maintenance (for example: overalls,
gloves, protective glasses, ear plugs and caps, etc.).
5) All installation and maintenance operations must be carried out both when the machine is
switched-off (environment pressure) and when the electrical circuit is off.
6) Transmission parts like couplings and pulleys must be safe. Check air/oil pipe seals. Do not
touch the mobile elements of the product when the machine is on.
7) Equipment and/or other systems used for motion, installation and maintenance will have to
be adequately gauged in terms of weight and geometry. Protruding parts must be sheltered
when the machine is on.
8) The manufacturer is not liable for damages to people and/or objects that may be caused by
product misuse, non-compliance or partial compliance with safety standards mentioned in
this document, changes even small ones, as well as tampering and use of non-original spare
parts.
9) The warranty period, unless otherwise stated in written form, is 15 (fifteen) months
from production date, based on the lot no. reported on the item. Anyhow, it cannot be
earlier than 12 months from dispatch date. Commodities and wear-and-tear materials are
not eligible to warranty. The warranty is not valid if VMC products turn out to be:
• tampered or modified by people who have not been directly authorized in written
form by VMC Spa Technical Support.
• damaged by bad use or carelessness in setting-up and/or management by the Customer.
• returns with NON-ORIGINAL and/or UNSUITABLE packaging that does not
guarantee their initial conditions.
10) At the end of its lifetime, a product will have to be disposed of, complying with current law
rules regarding industrial waste disposal.
V.M.C. s.p.a.
reserves the right to modify
the installation procedure and runbook without prior notice.
To Previous Page
Loading...