22 Attendant Features
Speed Dial Bin
The following procedure is used to associate names to a system
speed dial bin only.
To add names to a System Speed Bin:
1. Enter desired 3-digit Directory List number (000-199), or
dial [
.
] to scroll up (next entry) or [#] to scroll down
(previous entry) through the list.
If changing a name already associated with an existing
System Speed Dial Bin entry, skip to Step 4.
2. Press TRANS.
3. Dial system speed dial bin location (9020–9999).
4. Press MUTE.
5. Use keys on the dial pad to enter the name (up to
24 characters may be entered). The display updates as the
name is entered.
6. Press SPEED when finished. Confirmation tone sounds and
the display updates.
7. Press HOLD, then use [
.
] or [#] to scroll to next entry.
-or-
Hang up to end programming.
Attendant Disable Outgoing CO Line
The first Attendant can disable CO lines to prevent outgoing
access to those lines.
To disable CO Lines:
1. Lift the handset, or press the ON/OFF button.
2. Dial [602] on the dial pad. A confirmation tone will sound.
3. Press the line button(s) of the CO Line(s) to disable. The CO
Line button(s) LED flashes; a confirmation tone sounds.
To reactivate the CO Line(s):
Repeat Steps 1-3 to disable this feature.
To Next Page
Loading...
Need help?
General
